This shackle plate is suited to 45mm wide springs and connects to the welded-on dumjack using 1/2″ bolts. For the rear of the spring, the shackle plate should be positioned so that it is pointing slightly towards the front of the trailer, approximately at a 5 o’clock position.

Advantages:

• Suits 45mm springs
• Suits 1/2″ bolts
• 63mm, 88mm or 113mm centre to centre bolt holes
• Natural finish for durability
• Easy to install into dumjack
• Controlled swinging of springs

What’s Included:

• 1 x Shackle Plate 45mm Zinc

• Shackle plates suited for 45mm wide springs and connects to dumjack using 1/2″ bolts
• Installed on the rear of the spring, used to prevent swinging of springs and damaging the chassis body
• Position the shackle plates towards the front of the trailer at a 5 o’clock position