The trailer disc hub is most common styles of hubs used on boat trailers with brakes. Each disc hub comes complete with the bearings, seal, dust cap and nuts you need to safely replace the hubs on your trailer.  Designed for everyday use, the LM style of bearings are usually suitable for trailers with 39mm round or 40mm square axles, while the S/LINE style of bearings are typically used on 45mm and selected 50mm axles. If you aren’t sure what bearing style or stud pattern you have please view the downloadable resource pdf attached or contact on of our friendly staff. With galvanised rust protection they are perfect for boat trailers or jet ski trailers that are used in fresh or salt water.

Advantages

• Pick your stud pattern 
• Pick your bearing style
• Pre-pressed bearing cups
• Fittings included
• Galvanised finish
• SG casted iron

What’s Included

• 1 x Galvanised Trailer Disc Hub
• 1 x Inner Cup & Cone
• 1 x Outer Cup & Cone
• 1 x  Marine Oil Seal
• 1 x 3/4″ Dust Cap
• Wheel Nuts to suit

• Built from solid steel and is ADR certified
• Apply grease to the bearings and simple slide the hub onto the axle to secure them on
• Hubs come with cups already pressed in so all you have to do is insert the greased bearings